Performance Characteristics of Microstrip Antenna for X-band Application

R. D. Mengade, V. M. Dhede, A. S. Bhalerao


In remote correspondence framework reception
apparatuses are the most imperative component for making
correspondence join amongst source and destination. Wanted patch
reception apparatus outline is reproduced by utilizing high
recurrence recreation programming and fix radio wire is composed
according to prerequisite. Radio wire measurements, for example,
Length (L), Width (W), and substrate dielectric consistent and
parameters like Return Loss, Gain, impedance and current
dissemination are ascertained utilizing CAD-FEKO. A wide
working transfer speed for a solitary component rectangular
microstrip patch receiving wire can be gotten by cutting a U-molded
space on the patch. By utilizing U opening on the patch reception
apparatus can be worked in a few groups at various frequency. The
receiving wire has been outline to be worked in the scope of 8-
12GHz. Consequently this reception apparatus is exceedingly
reasonable for X-band applications In this work, the parametric
investigation of single component U opening MSA, a 2×1 and 4×1
varieties of microstrip radio wire has for broadband cutting edge
remote applications covering double or triple band operations has
been introduced. Proposed work started by considering a double
band single component reception apparatus, which works in X
groups of cutting edge remote correspondence. Single-food reception
apparatus operation has been done. Outlined reception apparatus has
sprightly enraptured. Proposed reception apparatus accomplishes
S11< - 10dB at all specified groups.

Full Text:



Constantine A. Balanis, “ANTENNA THEORY” Analysis and design”,

second edition :reprint 2007,John Wiley Publication.

G. Kumar and K. C. Gupta, “Broad-band microstrip antenna using

additional resonators gap-coupled to the radiating edges,” IEEE Trans.

Antennas Propag., vol. 32, no. 12, pp. 1375–1379, 1984.

C. K. Aanandan, P. Mohanan, and K. G. Nair, “Broad-band gap coupled

microstrip antenna,” IEEE Trans. Antennas Propag., vol. 38, no. 10, pp.

–1586, 1990.

M. A. Matin, B. S. Sharif, and C. C. Tsimenidis, “Probe fed stacked patch

antenna for wideband applications,” IEEE Trans. Antennas Propag., vol.

, no. 8, pp. 2385–2388, 2007.

M. Gopikrishna, D. D. Krishna, C. K. Aanandan, P. Mohanan, and K.

Vasudevan, “Design of a compact semi-elliptic monopole slot

elements,”IEEE Trans. Antennas Propag., vol. 55, no. 4, pp. 1196–1199,

David M. Pozar, “A Review of Microstrip Antennas: History, Operation,

Development, and Applications”, May 1996.

R. Rajkumar, P.Subbulakshmi “Design and characterization of corporate

feed rectangular microstrip patch array antenna”2013 IEEE International

Conference on Emerging Trends in Communication and Nanotechnology

(ICECCN 2013).

Md.TanvirIshtaiqueulHuque, Md. Kamal Hosain, Md. Shihabul Islam and

Md. Al'AminChowdhury, "Design and Performance Analysis of Microstrip

Array Antennas with Optimum Parameters for X'band Applications,"

International Journal of Advanced Computer Science and Applications,

Vol. 2, No. 4, 2011.

Yong Liu, Li-Ming Si,MengWei, Pixian Yan, Pengfei Yang, Hongda Lu,

Chao Zheng,Yong Yuan, JinchaoMou, XinLv, and Housjun Sun, “Some

Recent Developments of MicrostripAntenna”Hindawi Publishing

Corporation International Journal of Antennas and Propagation Volume

, Article ID 428284, 10 pagesdoi:10.1155/2012/428284.

V. P. Sarin, M. S. Nishamol, D. Tony, C. K. Aanandan, P. Mohanan, and

K. Vasudevan“ABroadband -Strip Fed Printed Microstrip Antenna”, IEEE

Trans Antennas Propag., vol.59, NO. 1, January 2011,pp.281-284

S. D. Lokhande, R. C. Jaiswal, A. S. Bhalerao, “L- Probe Fed Microstrip

Antenna”, International Journal of Engineering Research & Technology

(IJERT) Vol. 2 Issue 6, June - 2013 IJERTIJERT ISSN: 2278-0181.


  • There are currently no refbacks.

Copyright © IJETT, International Journal on Emerging Trends in Technology