Formulation of Mathematical Model, Design of Experimentation, Optimization and Investigation of Parameters for Integrated Bamboo Processing Machine

P. G. Mehar, Dr. A. V. Vanalkar, Dr. S. S. Khandare

Abstract


The research work shows the mathematical modeling,
experimentation on integrated bamboo processing machine for
splitting and slicing of bamboo. This paper presents the
experimental investigation of some parameters of integrated
bamboo processing machine. An attempt of minimummaximum
principle has been made to optimize by range
bound process for maximizing production rate of integrated
bamboo processing machine. In this research paper
mathematical model is develop and on basis of experimental
data and results given by formulated model, investigations of
some parameters have been carried out.


Full Text:

PDF

References


Aniket Baksy, “The Bamboo Industry in India”, CCS

working Paper # 283, July 2013.

Gnanaharan R. and Mosteiro A.P., Manual on Processing

of bamboo and rattan of International Network for

Bamboo and Rattan (INBAR), New Delhi, Beijing,

Eindhoven.

Xiaobo Li, “Physical, Chemical, and Mechanical

Properties of Bamboo and Its Utilization Potential for

Fiberboard Manufacturing”, M.S. Chinese Academy of

Forestry, May, 2004

R. S. Kadu, Dr. G. K. Awari, Dr. C. N. Sakhale and Dr. J.

P. Modak, Formulation of Various Mathematical Models

for the Investigation of Tool Life in Boring Process using

Carbide and CBN Tools, International Journal of

Application or Innovation in Engineering & Management

(IJAIEM),ISSN 2319-4847, Volume 3, Issue 3, March

, pp. 86-97

V.S. Oberoi, report of Technology Information,

Forecasting & Assessment Council (TIFAC), New Delhi,

Annual Report, 2004-05 on National Mission on Bamboo

Applications (NMBA).

Modak, J. P. and Bapat, A. R., “Formulation of

Generalised Experimental Model for a Manually Driven

Flywheel Motor and its Optimization”, Applied

Ergonomics, U.K., Vol. 25, No. 2, pp 119-122, 1994.

Shiwalkar B.D., Design Data for Machine

Elements, Dattatraya Publications, Nagpur (India).

Hilbert Schenck, Theory of Engineering

Experimentation, McGraw Hill, New York.

Prashant Bamboo Machine Sales Corporation, Nagpur

(www.prashantbamboo.com)

C. N. Sakhale, et al “Design of Experimentation,

Formulation of Mathematical Model and Analysis for

Bamboo Cross Cutting Operation” International Journal

of Multidisciplinary Research & Advances in Engg.

(IJMRAE), ISSN 0975-7074, Vol. 2, No. I, April 2010,

pp 61-83

Sakhale C. N. et. al., “Design of a Comprehensive

Bamboo Processing Machine”, IFTToM: PICA- 2006,

th – 14th July, 2006, Vol.1, pp.51-54.

S. P. Mishra, J. P. Modak, O. S. Bihade, D. K. Parbat,

“An Approach to Simulation of A Complex Field

Activity by a Mathematical Model”, Industrial

Engineering Journal, Vol. II, Issue No.20, February 2011,

pp.11-15.

R. K. Bansal, “Fluid Mechanics and Hydraulic

machines”, Lakshmi Publications, Ninth edition (2011).

S. K. Choudhary, R. D. Askhedkar, J. P. Modak,

“Planning of Experimentation to optimize performance

of α- configuration Stirling cycle Refrigeration System”,

International Journal of Multidisciplinary Research and

advances in Engineering (IJMRAE), Vol.2, No.1,

April2010, pp.233-244.

C. N. Sakhale et. al. “Formulation and Comparison of

Experimental based Mathematical Model with Artificial

Neural Network Simulation and RSM (Response Surface

Methodology) Model for Optimal Performance of Sliver

Cutting Operation of Bamboo”, 3rdInternational

Conference on Materials Processing and Characterization

(ICMPC 2014 ), pp 877-891.

C. S. Verma, V. M. Chariar and R. Purohit, Cleavage

Analysis of Bamboo: A Natural Composite, International

journal of Engineering Research and Application

(IJERA), ISSN 2248-9622, Vol. 2, Issue 2, Mar-Apr

, pp. 1265-1268.

S. K. Undirwade, Dr. M. P. Singh, Dr. C. N. Sakhale, V.

N. Bhaiswar, V. M. Sonde, Experimental and

Dimensional Analysis Approach for Design of Human

Powered Bamboo Sliver Cutting Machine, International

Journal of Engineering Science & Advanced Technology

(IJESAT), ISSN: 2250-3676, Volume 2, Issue 5, Sep-Oct

, pp. 1522-1527

C. N. Sakhale, S. N. Waghmare, S. K. Undirwade, V. M.

Sonde and M. P. Singh, Formulation and Comparison of

Experimental based Mathematical Model with Artificial

Neural Network Simulation and RSM (Response Surface

Methodology) Model for Optimal Performance of Sliver

Cutting Operation of Bamboo, Elsevier, 3rd International

Conference on Materials processing and Characterisation

(ICMPC 2014).

Anu Maria, Introduction to Modeling and Simulation,

Proceedings of the Winter Simulation Conference (1997),

pp7-13.

S. R. Ikhar, A. V. Vanalkar, J. P. Modak, “Simulation and

Mathematical Modeling of a Manual Stirrup Making

Activity Using Field Data Based Model”, International

Journal of Engineering Research and Industrial

applications. ISSN 0974-1518, vol.4, Issue no.1 (Feb.

, pp311-324.


Refbacks

  • There are currently no refbacks.


Copyright © IJETT, International Journal on Emerging Trends in Technology